Main technical parameters :
* Optical fiber external diameter: φ0.9mm, φ2.0mm, φ3.0mm are optional, and PC, UPC and APC are available, there are two
kinds of single mode and multi-mode.
* Insertion loss: ≤0.2dB
* Echo Loss: PC≥40dB,UPC≥50dB,APC≥60dB
* Exchangeability test: ≤0.2dB
* Vibration test: ≤0.1dB (10-60Hz, 1.5mm amplitude)
* Tensile strength test: ≤0.1dB (0-15Hg tension, excluding 0.9mm optical fiber)
* High temperature test: ≤0.2dB (+85 C, lasting 100 hours)
* Low temperature test: ≤0.2dB (-40 C, lasting 100 hours)
* Temperature cycling test:≤0.2dB (-40 ~85 C, after 5 cycles)
* Humidity test: ≤0.2dB (+25℃~+65℃, relative humidity 93%, 100 hours later)
* Commonly used connectors: SC (large head)/LC (small head/FC
(spiral port)/ST (card port)
Scope of application :
* Optical Fiber Communication System, Optical Fiber Access Network,
Optical Fiber Data Transmission, Optical Fiber CATV, Local Area Network (LAN), Testing Equipment
Autonomous production of optical fiber cable :
FTTH Optical Fiber to Home, Trunk to Home, FTTH Distribution Box,
Corridor Box, Optical Splitter Box, Optical Fiber Stripping Clamp,
Tail Fiber, Jump Line, Optical Fiber Adapter, Coupler, Fused Fiber
Disk, Optical Fiber Panel, ODF Box, Adapter, Optical Fiber Flange,
Optical Fiber Coupler, Optical Fiber Desktop Box, Optical Fiber
Cold Connector, Optical Fiber Fast Connector, ODF Unit Box,
Integrated Module, Optical Fiber Fused Fiber Communications
products such as pipes, wiring frames, indoor and outdoor junction
boxes, cabinets, etc.
Specification parameter :
