Home > FTTH Fast Connector >

SC UPC FTTH Fast Connectors 55mm 50mm 0.2dB Blue Quick Field Assembly

Product Categories

Shenzhen damu technology co. LTD

Contact Now

SC UPC FTTH Fast Connectors 55mm 50mm 0.2dB Blue Quick Field Assembly

Ask Lasest Price
Brand Name :	DAMU
Model Number :	DM-FC02
Price :	0.2-0.3

Add to Cart

Product Details
Company Profile

SC UPC FTTH Fast Connectors 55mm 50mm 0.2dB Blue Quick Field Assembly

FTTH Fast Connectors SCUPC

DESCRIPTION

1. Quick Assembly SC connector can provide quick and easy
terminations of fibers in the field, and options are available for
900 micron and 250 micron.
2. It allows the installer to terminate and make connection in
minutes at equipmentand fiber patch panels.
3. This connector system removes any requirement for epoxy,
adhesives or costly curing ovens,
with features of high installation quality, high success rate and
high reliability.

2.Material specification

Name	Specification	Remarks
Fiber type	Single mode or Multi mode	Consistent with ROHS,IEC
Cable diameter	250um
Applicable for	Indoor or Outdoor FTTH
Connector type	SC
Core diameter	2.499±0.002mm
Core concentricity	≦0.5um

End face requirement
Region
DefectRegion A
(0～25um)Region B
(25～125um)Region C
(125～250um)
ScratchAllow one scratch no more than the fiber core and width≤1umAllow two scratchs and the width≤2umAllow five scratchs and width≤2um
SpeckleAllow one speckle no more than the fiber core and diameter≤1umAllow two speckles and the diameter≤2umAllow two speckles and the diameter≤5um
ApronBetween area B and area C,allow apron which aperture width less
than 5um;and the length of the apron is less than 30% of the
perimeter of the fiber end

Insert core end face 3D
APCUPC
Fiber height(nm)-100～+100-100～+50
Radiusof curvature(mm)5～127～25
Apex offset(um)≤50
Angle error(°)±0.3
Annex one,Environmental testing
ProjectTest conditionIndexMonitoring proportion
High temperature85℃,96HΔIL≤0.2dBRandom monitoring of WIP 5pcs
Low temperature-40℃,96HΔIL≤0.2dB
Loop-40～+85℃,3.5H/Cycle,40times loopΔIL≤0.2dB
Hot and humid110℃,90%RH,2 atmospheric pressure,96HΔIL≤0.2dB
Immersion43ºC, PH5.5,168HΔIL≤0.2dB

Annex two,Mechanical test
ProjectTest conditionIndexMonitoring proportion
To attack1.8m, three axial, 8 times / axialΔIL≤0.2dBRandom monitoring of WIP 5pc
Vibration10 to 50HZ, 45 times /min, amplitude 0.75mm, three axial. Each
axial 30minΔIL≤0.2dB
ReverseDistance machine 20 to 28cm, + 180 degrees, 6s/ times, 25 timesΔIL≤0.2dB
tensileThe distance from the plug is 20 to 28cm, 1min, and the load is 50NΔIL≤0.2dB

Annex three,Reference standard
(1).Domestic standard:
GB/T 12507.1-2000
YD/T 1272.3-2005
YD/T 987-1998
YD/T 2152-2010
YD/T 1198-2002
(2).International standard:
GR-326-CORE .

Product Tags:

SC UPC FTTH Fast Connectors

Blue FTTH Fast Connectors

Field Assembly SC UPC Fast Connector

SC UPC FTTH Fast Connectors 55mm 50mm 0.2dB Blue Quick Field Assembly

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen damu technology co. LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more FTTH Fast Connector products from this supplier

Find Similar Products By Category:

Telecommunications

Hot Searches:

Region Defect	Region A (0～25um)	Region B (25～125um)	Region C (125～250um)
Scratch	Allow one scratch no more than the fiber core and width≤1um	Allow two scratchs and the width≤2um	Allow five scratchs and width≤2um
Speckle	Allow one speckle no more than the fiber core and diameter≤1um	Allow two speckles and the diameter≤2um	Allow two speckles and the diameter≤5um
Apron	Between area B and area C,allow apron which aperture width less than 5um;and the length of the apron is less than 30% of the perimeter of the fiber end

	APC	UPC
Fiber height(nm)	-100～+100	-100～+50
Radiusof curvature(mm)	5～12	7～25
Apex offset(um)	≤50
Angle error(°)	±0.3

Project	Test condition	Index	Monitoring proportion
High temperature	85℃,96H	ΔIL≤0.2dB	Random monitoring of WIP 5pcs
Low temperature	-40℃,96H	ΔIL≤0.2dB
Loop	-40～+85℃,3.5H/Cycle,40times loop	ΔIL≤0.2dB
Hot and humid	110℃,90%RH,2 atmospheric pressure,96H	ΔIL≤0.2dB
Immersion	43ºC, PH5.5,168H	ΔIL≤0.2dB