ITEM | Technical Parameters |
Application | FTTH Drop Cable |
Optical fiber diameter | 125μm ( 652 & 657 ) |
Fiber Type | Single Mode |
Tight buffer diameter | 250μm |
Insertion Loss | ≤ 0.10dB(1310nm & 1550nm) |
Return Loss | ≤ -40dB |
Fastening strength of naked fiber | >5 N |
Tight packet layer clamping forces | >8 N |
Operating Temperature | -40~+85°C |
Product description
Applicable to home butterfly cable and any type Flexer pigtail
connection, cost saving; using V slot docking technology is mature,
suitable for multimode fiber connection; free fixture design,
operation time is less than a minute.
Flex cable households into the end of direct access to the ONU,
tension is greater than 5KG. The utility model has the advantages
of wide application range, and is especially suitable for the
network upgrade of the existing residential areas and the
reconstruction of the optical fiber network. The utility model
reduces the use of a panel box and a supporting flange, not only
reduces the cost of the optical fiber access, but also the
operation is simple and convenient.
All kinds of collocation can be combined (SC, FC, fiber LC, ST
etc.)
technical standard
Scope of application: 3.1 x 2.0mm dish optical cable
Fiber diameter: 125 m (657A657B)
Tight cladding diameter: 250 M900 M
Application mode: single mode and multimode
Operating time: About 30s (no fiber processing)
The insertion loss is less than 0.15dB (1310nm1550nm):
The return loss is less than -45dB.
Continued success rate: > 98%
Assembly times: > 10 times
Bare tightening force: more than 5N
Tight wrap clamping force: > 8N
Tensile strength: > 50N
Use temperature: -40 ~ +85
Online anti pull test (30N): IL = 0.2dB
Mechanical durability (500): IL = 0.2dB
Drop test: (4m from the cement floor in each direction 1 times, a
total of 3 times) IL = 0.2dB
pictures
